Showing 1–32 of 534 results
-
0011049 Cyberdata SIP Call Button
- TLS 1.2, Enhanced security for IP endpoints in a local or cloud based environment
- Supports SRST (Survivable Remote Site Telephony) in a Cisco environment
- Streamlined case design
- Network web management and firmware download
- Dry relay contact for auxiliary control
- Door closure and tamper alert signal
- User downloadable message up to 80 seconds
- Single button call to pre-set number
- Continuous repeat of message
- Call progress light
Use Areas Include: Classrooms, Banks or financial institutions, Court Rooms, Front lobby reception areas, Grocery Store/Retail, Assembly Lines.
-
011216 Cyberdata SIP Office Ringer
The SIP-enabled Office Ringer is perfect for small offices or cubicles for a distinct ring tone. It is a Power-over-Ethernet (PoE 802.3af), Voice-over-IP (VoIP) notification device that easily connects into existing local area networks (LANs) with a single cable connection.
The SIP Office Ringer provides a user uploadable audible ring indication when part of a ring group. The SIP Office Ringer also supports direct SIP voice paging and priority-based Multicast broadcasts.
- TLS 1.2, Enhanced security for IP Endpoints in a local or cloud based environment
- Drywall mounting
- Supports SRST (Survivable Remote Site Telephony) in a Cisco environment
- Streamlined case design
- Network web management and firmware download
- Network adjustable speaker volume
- Concurrent SIP and multicast paging
- Dry relay contact for auxiliary control
- Door closure and tamper alert signal
- Downloadable alert, ringtones and callout messages
-
01260-001 Axis 2N IP Verso Tamper Switch
01260-001 Axis 2N IP Verso Tamper Switch module detects any unauthorised opening of the intercom. By using this, you significantly improve the security of the whole installation. You connect the tamper switch directly to the security control panel. If any unauthorised tampering occurs, the switch triggers an alarm. For a more comprehensive setup in the Automation section, it is necessary to connect the tamper switch to an I/O module (9155034) or Wiegand module (9155037). You install the tamper switch in a special location in the main unit. It does not need a separate slot.
We offer best Price Guarantee, Please contact us for quote.
-
013191-001 Axis 2N Induction Loop
013191-001 Axis 2N Induction Loop wirelessly transmits sound from the 2N IP intercom to the affected person’s hearing aid. A hearing impaired visitor to the building thus gets the benefit of voice communication. By installing the induction loop at the door you meet not only the necessary standards, but facilitate the hearing aid wearer’s communication e.g. with the reception desk.
- Audio transmission to hearing aids
- Simple connection to the 2N IP intercom
- Built-in antenna
Please scroll down to Accessories & Complementary Products to see more options.
We offer best Price Guarantee, Please contact us for quote.
-
01353-001 Axis 2N IP Safety Emergency Intercom with 10W Speaker
01353-001 Axis IP Safety Emergency Phone with 10W Speaker is designed for use in Parking Lots, Motorways, Train Stations, Airports etc. For applications where it is not possible / feasible to run cables, these intercoms can be 3G enabled to work over the Cellular network.
- The greatest durability on the market
- A striking orange colour
- Illuminated emergency buttons
- High-quality audio
- Ease of use and remote administration
- External source / PoE power supply
The above unit is designed for flush mounting, please select mounting box by scrolling down to Accessories & Complementary Products.
We offer online price beat guarantee, Please contact us for price or add item to Quote Request.
-
01371-001 Axis 2N Access Unit RJ45 Connector Cable
01371-001 Axis 2N Access Unit RJ45 Connector Cable allows connection of a Axis 2N® Access Unit Bluetooth to a LAN through an Ethernet cable with an RJ45 connector (the connection to a LAN without the use of this cable is through a contact block).
We offer best Price Guarantee, Please contact us for quote.
-
01387-001 Axis 2N Wiegand Isolator
01387-001 Axis 2N Wiegand Isolator is designed for galvanic isolation of two devices separately power supplied and interconnected via the Wiegand bus. The Wiegand Isolator protects the interconnected devices against communication errors and/or damage.
We offer best Price Guarantee, Please contact us for quote.
-
01390-001 Axis 2N External 13.56MHz Mifare RFID Card Reader, Weigand.
01390-001 Axis 2N External 13.56MHz Mifare RFID Card Reader, Weigand is a secondary reader for connection to an internal reader. Allows control of card entry from both sides of the door. IP68 cover, also suitable for exteriors. Reads Mifare cards.
We offer best Price Guarantee, Please contact us for quote.
-
01393-001 Axis 2N Induction Loop Power Supply
External power supply for the induction loop.
- Input 230V AC
- Output 12V DC
We offer best Price Guarantee, Please contact us for quote.
-
01400-001 Axis 2N External RFID Reader 13.56MHz + 125kHz with USB Interface
01400-001 Axis 2N External RFID Reader 13.56MHz + 125kHz with USB Interface is suitable for system administration and enrollment of 13.56MHz and 125kHz cards using the web interface of the 2N IP intercom or the Axis 2N® Access Commander. It reads serial numbers from the RFID cards. USB driver is required.
We offer best Price Guarantee, Please contact us for quote.
-
01401-001 Axis 2N External Fingerprint Reader with USB Interface
01401-001 Axis 2N External Fingerprint Reader with USB Interface is intended for administration and adding new user fingerprints via the device’s web interface (Axis 2N® Access Unit or Axis 2N® IP Verso) or Axis 2N® Access Commander software. A USB driver is required for correct function.
We offer best Price Guarantee, Please contact us for quote.
-
01425-001 Black / 01426-001 White – Axis 2N Indoor Touch Desk Stand
A practical stand for the answering unit 01425-001 Black / 01426-001 White – Axis 2N Indoor Touch Desk Stand is designed to be always within easy reach. The Axis 2N Indoor Touch communicator can be easily fixed to the stand with the aid of two screws. You can put it anywhere, e.g. a reception desk, a table or on a shelf.
Available in Black or White colour, please select from option below.
We offer best Price Guarantee, Please contact us for quote.
-
01668-001 Axis 2N Indoor Touch 2.0, 7 inch intercom monitor black
- 7″ touchscreen with energy saving mode
- Reception of HD picture from the door communicator
- Two-way communication with other units in the network
- Display of missed calls
- Setting “Do not disturb” (“DND”) status
- Powered by PoE or external source
- Wi-Fi option available
- Android OS allows integration of 3rd party apps. ( unlocking licence required).
To order Desk Mount Stand etc. please scroll down to Accessories & Complementary Products below.
We offer online price beat guarantee, Please contact us for price or add item to Quote Request.
-
01669-001 Axis 2N Indoor Touch 2.0, 7 inch intercom monitor white
- 7″ touchscreen with energy saving mode
- Reception of HD picture from the door communicator
- Two-way communication with other units in the network
- Display of missed calls
- Setting “Do not disturb” (“DND”) status
- Powered by PoE or external source
- Android OS allows integration of 3rd party apps. ( unlocking licence required).
To order Desk Mount Stand etc. please scroll down to Accessories & Complementary Products below.
We offer online price beat guarantee, Please contact us for price or add item to Quote Request.
-
01698-001 Axis 2N Indoor Talk touch screen monitor black
- Luxury design and materials
- Modification to your requirements
- HD quality sound with high volume
- Do not Disturb Mode
- Doorbell button support
- Parental Lock
- PoE for easy installation
- Flush mount box available – please browse under accessories
We offer best Price Guarantee, Please contact us for quote.
-
01699-001 Axis 2N Indoor Talk touch screen monitor white
- Luxury design and materials
- Modification to your requirements
- HD quality sound with high volume
- Do not Disturb Mode
- Doorbell button support
- Parental Lock
- PoE for easy installation
- Flush mount box available – please browse under accessories
We offer best Price Guarantee, Please contact us for quote.
-
01700-001 Flush Mount Box for Axis 2N Indoor View / Compact / Talk
-
Option of drilling holes with a drill
-
Fine-tuning the level after installation
-
Attachment of a spirit level for easy levelling
-
Suitable for both plasterboard and brick wall installations
We offer best Price Guarantee, Please contact us for quote.
-
-
01935-001- Axis 2N Indoor Compact Intercom Monitor Answering Unit, Black
- 4.3″ display for video communication with visitors
- Intuitive controls, even for inexperienced users
- Designer surface made of tempered glass
- Configuration via a web interface
- HD Quality Sound with Noise Suppression
- Display of date and time in sleep mode
- Do not disturb mode
- Parental lock activated via code
- Dedicated lift-call button from the comfort of your apartment
- Induction loop output for hearing impaired users
- Switching between video from IP intercom and external IP camera
- PoE for quick and easy installation
To order mounting box etc. please browse Accessories and Complementary Products below.
We offer best Price Guarantee, Please contact us for quote.
-
01936-001- Axis 2N Indoor Compact Intercom Monitor Answering Unit, White
- 4.3″ display for video communication with visitors
- Intuitive controls, even for inexperienced users
- Designer surface made of tempered glass
- Configuration via a web interface
- HD Quality Sound with Noise Suppression
- Display of date and time in sleep mode
- Do not disturb mode
- Parental lock activated via code
- Dedicated lift-call button from the comfort of your apartment
- Induction loop output for hearing impaired users
- Switching between video from IP intercom and external IP camera
- PoE for quick and easy installation
To order flush / surface mount kit for Axis 2N Indoor Compact please browse Accessories and Complementary Products below.
We offer best Price Guarantee, Please contact us for quote.
-
01940-001 Axis 2N IP Verso Wedge Backplate for 2 modules
01940-001 Axis 2N IP Verso Wedge Backplate for 2 modules is wall-mounted, and its angle (25°) offers better visual coverage of the area in front of entry door. It is only suitable for surface installation of the double-module versions of the Axis 2N® IP Verso and Axis 2N® LTE Verso intercoms. The dimensions of the part attached to the wall are 114 x 239mm. The dimensions of the area the intercom is attached to are 103 x 234mm.
- Suitable for outdoor use
- Universal – can be used to tilt left or right
- Space for the connection cables
We offer best Price Guarantee, Please contact us for quote.
-
01975-001 Axis 2N IP Verso Secure Door Pack
Increase the security of your doors to the maximum. A useful bundle containing a security relay, tamper switch and I/O module. Read what these accessories offer below.
The security relay is a simple accessory which prevents doors from being opened with a 12V battery. Such a battery allows burglars to open low-power locks if they reach the cables connecting the intercom/reader to the lock. Install the relay between the intercom/reader and the lock. Then pair the security relay with the 2N device. Once set up, the lock will only open if the relay identifies the specific signal sent from the intercom/reader.
The tamper switch is designed to detect intrusion into the intercom’s frame and will activate an alarm if it detects intrusion. What if you also want to prepare more complex scenarios which activate when an intercom is opened without authorization? The I/O module allows you, for example, to set the intercom to take photos and contact the appropriate security agency.
The above components may also be ordered individually – Security relay, Tamper switch and I/O module
We offer best Price Guarantee, Please contact us for quote.
-
01976-001 Axis 2N IP Force Secure Door Pack
01976-001 Axis 2N IP Force Secure Door Pack provides the very highest level of security for your entrance doors. It is comprised of an add-on switch (also including a tamper switch) and a security relay. The individual components of the bundle can also be ordered separately. The additional switch allows you to control a second appliance, passive switching for an unlimited period, max. 30 V/1 A or active 12 V DC/max 700 mA.
01976-001 Axis 2N IP Force Secure Door Pack also includes a tamper switch to signalize if the front panel is opened. The security relay is a simple add-on device that prevents unauthorized manipulation with the lock. It is installed between the intercom from which it is powered and the lock which it controls.
- Allows you to control a second appliance
- passive switching for an unlimited period of time
- max. 30 V/1 A or active 12 V DC/max 700 mA
- prevents unauthorised manipulation with the lock
- Compatible with Axis 2N IP Force Intercom
We offer best Price Guarantee, Please contact us for quote.
-
02039-001 Desk Stand for Axis 2N Indoor View / Compact / Talk
A stand for 2N answering units. The stand can be positioned on a reception desk or even a shelf in a flat. Simply fix the answering unit to the stand without any need for a flush-mount bracket. The stand is universal in size, comes in black, and is suitable for the 2N Indoor Talk, the 2N Indoor Compact and the 2N Indoor View.
- Easy installation
- Anti-slip layer ensuring stability
- Universal size
We offer best Price Guarantee, Please contact us for quote.
-
02078-001 Axis IP Verso Glass Mount
With 02078-001 Axis IP Verso Glass Mount, you can easily mount the 2N® IP Solo intercom on a glass surface. For complete installation of the intercom, you will also need a backplate (9155068), which you will apply to the glass mount. You then install the intercom on the mounting bracket. This installation is only suitable for the surface mount installation version of the Axis IP Solo intercom (9155301CS/9155301CBS). We use a high-quality glue that can withstand large fluctuations in temperature.
We offer best Price Guarantee, Please contact us for quote.
-
02087-001 – Axis 2N Indoor View 7 inch touch screen monitor, Black
- 7″ HD Touchscreen – Your customer will appreciate how easy it is to operate the unit on the large display. The home screen even provides the current weather forecast.
- Full Screen Video Calls – We’ve enlarged the video call preview. This means residents can even read a courier’s name tag with ease. Wide screen calls will be compatible only with some Axis 2N intercoms.
- Stylish Design – A luxury penthouse deserves a great looking unit. Offer the Axis 2N® Indoor View to ensure you win your project.
- Residents privacy in safe hands – The Axis 2N® Indoor View runs on our very own operating system. We’ve made sure that no one can listen in or record residents’ conversations.
- First Configuration from your office – Save time and money. You can set up all the units in a project remotely without the need to travel to the installation site.
- Produced and developed in Europe – We pride ourselves on the premium materials used in manufacturing. Your customers will be pleased with the quality and will be happy to come back in the future.
To order flush / surface mount kit for Axis 2N Indoor view please browse Accessories and Complementary Products below.
We offer online price beat guarantee, Please contact us for price or add item to Quote Request.
-
02088-001 – Axis 2N Indoor View 7 inch touch screen monitor, White
- 7″ HD Touchscreen – Your customer will appreciate how easy it is to operate the unit on the large display. The home screen even provides the current weather forecast.
- Full Screen Video Calls – We’ve enlarged the video call preview. This means residents can even read a courier’s name tag with ease. Wide screen calls will be compatible only with some Axis 2N intercoms.
- Stylish Design – A luxury penthouse deserves a great looking unit. Offer the Axis 2N® Indoor View to ensure you win your project.
- Residents privacy in safe hands – The 2N® Indoor View runs on our very own operating system. We’ve made sure that no one can listen in or record residents’ conversations.
- First Configuration from your office – Save time and money. You can set up all the units in a project remotely without the need to travel to the installation site.
- Produced and developed in Europe – We pride ourselves on the premium materials used in manufacturing. Your customers will be pleased with the quality and will be happy to come back in the future.
To order flush / surface mount kit for Axis 2N Indoor view please browse Accessories and Complementary Products below.
We offer online price beat guarantee, Please contact us for price or add item to Quote Request.
-
02309-001 Axis 2N Access Commander Advanced Licence
02309-001 Axis 2N Access Commander Advanced Licence software is for all 2N Access Units and IP (video) intercom systems, it supports up to 30 devices and 300 users. This software can run on your own PC, use in combination with the 2N access Commander Box is recommended.
-
GUI interface for set-up and control of 2N IP Intercom and Access Control Systems
-
Attendance System
-
Device monitoring and notification
-
Global search across the entire system
-
Easy Installation
-
Intuitive operation via web interface
-
Mass administration of 2N devices
-
Integration with third-party devices
-
Single user, Advanced License
We offer best Price Guarantee, Please contact us for quote.
-
-
02310-001 Axis 2N Access Commander Pro Licence
02310-001 Axis 2N Access Commander Pro Licence software is for all 2N Access Units and IP (video) intercom systems, it supports up to 100 devices and 1000 users. This software can run on your own PC, use in combination with the 2N access Commander Box is recommended.
-
GUI interface for set-up and control of 2N IP Intercom and Access Control Systems
-
Attendance System
-
Device monitoring and notification
-
Global search across the entire system
-
Easy Installation
-
Intuitive operation via web interface
-
Mass administration of 2N devices
-
Integration with third-party devices
-
Single user, Pro License
We offer best Price Guarantee, Please contact us for quote.
-
-
02311-001 Axis 2N Access Commander Unlimited Licence
02311-001 Axis 2N Access Commander Unlimited Licence software is for all 2N Access Units and IP (video) intercom systems, it supports unlimited devices and users. This software can run on your own PC, use in combination with the 2N access Commander Box is recommended.
-
GUI interface for set-up and control of 2N IP Intercom and Access Control Systems
-
Attendance System
-
Device monitoring and notification
-
Global search across the entire system
-
Easy Installation
-
Intuitive operation via web interface
-
Mass administration of 2N devices
-
Integration with third-party devices
-
Single user, Unlimited License
We offer best Price Guarantee, Please contact us for quote.
-
-
02318-001 Axis 2N NVT Phybridge PL-08 multipoint switch
IP door communication is the future, but not all buildings have IP cabling. Laying new cables is not the only solution. The existing cabling of old analogue systems can also be used. Simply connect the analogue cables to the switch and the IP products to the adapters. Implement your project quickly, with no costs to replace cables and minimum disturbance to residents.
- IP solutions with analogue cabling
- Triple the range
- Save on costs
We offer best Price Guarantee, Please contact us for quote.
-
02319-001 Axis 2N NVT Phybridge PL-08 pack with 6 adaptors
02319-001 Axis 2N NVT Phybridge PL-08 pack with 6 adaptors are additional adapters for use with the PL-08 Multi-point switch – used to retrofit existing analogue cabling systems to allow the use of IP intercom systems. The system consists of an IP Switch with an adapter interface to connect multiple door stations, access control units, and receiving units over 2-wire. The far end unit connects via cat5 / cat6 to a single adapter connected to the other end of the 2-wire. This item is an additional 6 adapters for the system.
- IP solutions with analogue cabling
- Triple the range
- Fast project completion
- Complement the system with mobile video
We offer best Price Guarantee, Please contact us for quote.
-
02320-001 – Surface Mount Box for Axis 2N Indoor View / Compact
2N 91278803 – 2N Surface Mount Box for Indoor View / Compact is ideally suited for surface / on wall mounting of the 2N indoor View or 2N Indoor Compact. Its black finish and structure match well with the surface of the rear part of the answering units. Install the box on the wall, fit the answering unit into it and screw it in place.
- Quick installation
- Ideal for retrofit projects
- Universal box for the 2N® Indoor Compact and 2N® Indoor View
We offer best Price Guarantee, Please contact us for quote.